Valve clearance adjustment should be done every 10,000 to 12,000 miles. Recently emails started coming in - "we can not find any valve adjustment tools for our earlyV8 - help!" Most companies are currently noting the old factory-style tools are no longer being manufactured, so we went to work to come up with the strongest and tightest fitting wrench that would go onto the ball socket adjusters and would not "spin-off" and round out the nuts. Watch the video below as Kent explains the problem and shows how this wrench may be the best available anywhere!
Product Details
IMPORTANT: Since the adjuster nuts are about 16.5 mm we have to take a 16mm crows foot and grind it slightly bigger so it fits TIGHT on the nuts and can round them off. Limited availability as we custom build these in our own shop and they are quite time-consuming to make the modification to fit VERY TIGHT on the ball adjuster.
Related Products:
M116 and M117 V8 Valve Cover Service / Oil Leak Fix Kit
This is a VERY common maintenance item on the older Mercedes V8 engines. If they are too old they will leak. If they are not put on properly they will leak. If you do any maintenance (ie, valve adjustment, clip replacement, timing chain, guides, etc), you should have this kit on hand.
Mercedes Early Gas Engine Custom Valve Spring Compressor / Valve Adjusting Tool
If you own one of the early Mercedes overhead camshaft engines from the mid-1950's up to the mid-1970s that have mechanical (non-self-adjusting) lifters this is a MUST HAVE tool! It does NOT work on the M110 twin cam engine.
Early 3.5 and 4.5 Complete Valve Clearance Adjustment Kit
Why do you need to do this? Valve clearances are supposed to be adjusted on these early V8s every 10,000 miles. You can imagine why this does not get done! Add to the fact owners can not find the right information or tools and it makes neglect even worse Why not on later model years?