Most of the older 450 engine fan clutches are still original on most of the older unrestored V8 models from 1970 to 1980. If you are having problems with your 450 V8 running hot check the friction in your clutch. They are often worn out as they seem to never get changed.
Product Details
You will get the following in this kit:
- New fan clutch
- New special mounting bolts.
- New stainless bolts for the fan to clutch mount
- Thread locker for all bolts
- Anti-corrosive gel
- Complete video instructions by Kent
Related Products:
1972 to 1980 4.5 450 Engine Thermostat Replacement Kit
This is seldom replaced. If you engine is taking over 15 minutes to get up to full operating temp then your thermostat is probably worn now. We got you covered with kit. We will get you the extra hardware, supplies and video instructions so you have the confidence to do this job yourself.
1970 to 1975 D-Jetronic V8 Front Engine Short Hose (s) Replacement DIY Kit
If you think your coolant hoses are "ok" they just may be, but it is what is hidden that could be a problem. When you remove those old hoses ( unless they have been replaced in the past 10 years) you may be shocked at what you find.
1970 to 1975 D-Jetronic Fuel Injection Repair / Service Instructions - On Demand Video
In this 36-minute instructional video, Kent will walk you through the process of doing a complete fuel hose replacement and fuel injector service on a 1970 to 1975 Mercedes V8 engine with Bosch EFI electronic fuel injection.