Includes a long 3/8 inch breaker bar with offset swivel head, correct socket, plastic mirror, and locking pin. You add another extension with a bigger deep socket on the end to make the job a snap. Watch the video below for a full explanation of this tool and how it works. We include a pin of the correct size and a plastic mirror so you can better see the lock-up hole under the tensioner. Watch the video below for a full demonstration.
Product Details
The tool measures approximately 15 inches long and has a 17mm 12-point shallow socket. The second extension and socket is NOT INCLUDED. You can add these from your own toolbox to give you the required length.
You can use this tool with or without the socket for other applications. VERY HANDY BREAKER BAR!
Related Products:
OEM M272 V6 M273 V8 COMPLETE Drive Belt, Pulley, and Tensioner Replacement Kit
Yes, that is correct, these are OEM parts - not cheap aftermarket. These are the same parts on all 272 V6 and 273 V8 from 2006 to 2013. That is a few million cars that are now all aging, and many have not had these parts replaced.
2000 to 2006 M112 V6 and M113 V8 Belt Tensioner with Pulley
Quality aftermarket part. If over 80,000 miles, replace this part when you replace your serpentine belt. Kent's custom tensioner tool is available separately below to help make the install of this new tensioner a "snap."
M112 V6 and M113 V8 Water Pump - Easy DIY
This is a common preventative replacement item as these engines age. No instructions are available at this time but there is plentiful information online to guide you in replacement.