This easy-to-operate ONE gallon pressure pump tank will help you fill your 722.9 transmission with minimal mess and fuss. It includes over 5 feet of hose ( 30 inches which are clear so you can see the flow rate. It comes with a special fitting that includes two (2) shut-off valves ( to control spills) and a clear filter to make absolutely sure you are putting clean fluid into the pan. Watch the videos below to learn more.
Product Details
1. It can be used to top off your transmission when you discover your fluid is low.
2. It can be used to fill your transmission after doing a fluid drain and filter change.
3. With the included extra clear hose and instructions in can be used to "power drain" all the fluid out including what is in the valve body, torque converter, and transmission cooler.
Now included: If you do plan to use this kit to do a full power drain (#3 above) we are including the two o-rings for the transmission cooler line at no extra charge. PLEASE NOTE: These orings work on most early version models but may not work on all or on some models after 2010. NOTE TO 4MATIC OWNERS: You will be able to use this pressure tank to fill your transmission, but the power drain function will NOT work due to complexity of the 4matic.
Extra long pipe is included so you an use this tank to fill your rear differential
Easy pressure release - always use when disconnecting hose!
If you have the early 2003 to mid-2010 transmission, this would be the time to upgrade to the newer deeper pan, the Smart Triple Media Mercedes filter. Kent has put together a complete upgrade kit and video instructions to make it easy to do this yourself. We also have a money-saving Combo kit for the full service. See related products below:
Related Products:
Early 722.9 Automatic Transmission Performance Upgrade with Full Drain and Fill Pressure Tank
Save $20 when you purchase these two kits together. Each can also be purchased separately. For a full description of each kit, click on the related products below. Each description will give you a complete summary of the specifications and usage.
Early 722.9 Transmission Pan and Filter Upgrade Kit w/ Video Instructions
Many enthusiasts are now buying these 2004 to mid-2010 high-performance Mercedes with little thought to the transmission.
Infrared Thermometer to Use When Checking Fluid Level in a 722.9 transmission
Since there are no dipsticks on these transmissions, the DIY way to check fluid level is from under the car with a touch-free thermometer to measure the heat of the transmission fluid BEFORE setting the correct level. Instructions are included with my full 722.9 transmission fill kit.
How to 722.9 Full System Power Fluid Drain Procedure - On Demand Video
You want your 2003 to 2010 7-speed transmission to last - this you should absolutely do.
722.9 Transmission Oil Cooler Line to Transmission Housing Seals x 2
To to prevent potential fluid weeping on the end of this pipe you might want to replace them if you end of removing the pipe in your procedure.
722.9 Transmission Fluid Service Fittings and Connecting Hose - Partial Kit
This kit will allow you to properly fill any 722.9 7 speed automatic transmission as well as other cars that use the underfill method.
2003 to 2009 722.9 7G Conductor Plate Removal and Reinstall Kit - D.I.Y.
PLEASE NOTE: You will get the filter and the gasket for the original transmission pan. Make sure your pan is original! This combo includes the three kits listing below. You will get full video instructions and will help you do this and save big $$$.