If you have a stuck key or failed lock in your 1977 to 1979 W123 this is your best option for a reliable replacement but we only have a few of these in stock. The exact originals as shown in the picture below are no longer made. These do not have a replaceable tumbler assembly. But the newer style here will fit and work perfectly in your early W123 with only one modification ( very small). You will have to remove the aluminum ring in the keyhole for this unit to fit through the dash. ( See second picture below: This unit comes with the vacuum engine shut-iff switch and the vacuum switch cam installed. The switch for the door buzzer is NOT included. If desired, you will have to remove it from your old lock assembly.
Product Details
Kent's on-demand video class now includes instructions on how to remove the steering lock with a key as well as how to remove it (much more difficult) if your key is stuck or you have lost the key!!!
Is your key stuck or last and you don't want to pay an arm and a leg to get it out. Kent's 44-minute in-depth video class will not only show you how to get this out of your dash with a working key, but the video will show you how to get it out without a key and it is not as difficult as you might have been led to believe!
Here is a close-up look of the original style tumbler assembly that you currently have. Note the smaller diameter of the key tumbler housing.
When you install the new larger-diameter upgrade in your dash, you will have to remove the chrome trim ring to get it to fit in the hole. Unfortunately, the new style (thinner) chrome trim ring is no longer available. You may be able to find a used one from a 1981 to 1985 123 chassis in a wrecking yard. If you can't find one, you are going to see the gap in the dash hole. Refer to the picture below.
f
The picture below shows the old-style electrical switch that is mounted into the steering lock housing with three machine screws. For a limited time a new genuine O.E. Mercede switch is included at no extra cost: backinstock
Related Products:
How to Replace a Mercedes Ignition Key Lock Buzzer Switch - On Demand Video
When replacing the steering lock assembly in your Benz you will need to remove that little black plastic switch on the side of the lock from the old one and put it on the new part. You can not pry it off, squeeze it off or pull it off by hand.
Ignition Steering Lock Removal and Replacement Manual by Kent Bergsma - Download
For all 108 109 114 115 107 116 123 126 201 and 124 Chassis 1968 to 1995 including those models that have a special cable installed to keep the transmission locked until the key was turned.
Removing a Totally Stuck Key and Steering Lock Assembly - On Demand Video
Jammed up steering locks and keys that won't turn can leave you stranded.
Early 123 Early 107 Late 116 Genuine OEM Ignition Switch
Get a spare. These will soon be NLA. NEW OLD STOCK Genuine Mercedes Ignition Switch. Fits early 123 chassis up through 1979, early 107 450SL from 1973-1980 and 1977-1980 116 300SD, 280SE, 450SE, and 450SEL.
Late 107 and 123, 126, 201, 124 Chassis Ignition Switch Only
This GENUINE MERCEDES switch will work on all 107 chassis 380SL and 560SL 1981 to 1989, all 126 chassis sedans and coupes 1981 to 1991 , all 123 chassis 240D 300D 300CD 300TD from 1980 to 1985, all 201 chassis 190E 2.6 and 190D ( 190E 2.3 up to 1988 ONLY) and all 124 chassis from 1986 to 1993.