Anytime you need to replace your rear shocks/struts, you must drop the rear control arm. If you are doing other rear suspension work, you may need to drop it as well. Kent came up with this tool kit when he was converting his SL500 to conventional coil-over shock absorbers. Watch the video below as Kent will explain each tool in the kit.
Product Details
The set includes:
- Long 18mm combination wrench
- Custom narrow head 8mm open-end wrench
- 12mm H.D. Hex socket
- Cut-off star wrench needed on some of the suspension bolt heads
- Blue thread locker
- Small container grease to help with outer end of control arm installation
PLEASE NOTE: As of 3/31/24 the price has been lowered and the 21mm long wrench is no longer included. This can be purchased separately below.
If you need instructions on removing or replacing your rear ABC struts check out Kent's on-demand video series below.
Related Products:
2003 to 2006 SL500 ABC to Coil-Over Conversion Master Installation Kit
PLEASE READ each item listed below for a full description of this complete conversion kit. Kent includes all 8 of his very detailed video installation guides. There is a big learning curve to doing this conversion if you have not done it before.
2003 to 2006 SL500 Rear Control Arm to Knuckle Bushing Replacement Kit
I call this the hidden and forgotten bushing. Why? Because you can not see it to inspect it, it hardly ever gets changed. When these bushings wear out you will feel "weird" movement in your rear end, especially going over rough ground.
Early R230 ABC Conversion: Installing Your New REAR Coil Over Shocks - On Demand Video
This is part two of a three-part series on converting your 2003 to 2006 SL500 to coil-over shock absorbers. It is 41 minutes in length. The complete series is 1 hour and 27 minutes and was too long to upload as one video.
21mm LONG Comination Wrench for Heavy Suspension Work
When you need the torque, this will deliver.