Early V8 and Diesel Engine Rotation Socket and Extension

27mm / 1 1/16" six point 3 in deep socket with short extension just the right length to fit into the front pulleys and clear the radiator on most early 6 clyinder, small V8 and diesel engines from the early 1960's up to 1985

For a number of maintenance operations, you need to be able to turn the engine over by hand. This includes valve adjustment, timing chain replacement, injection pump timing on diesel engines, checking and setting internal engine timing, draining the torque converter, and others. The best way to do this is to get the front crankshaft end bolt and rotate the engine clockwise (from the front) with a big ratchet wrench (see related products below). The problem is you need just the right length socket and extension. Too short and you can not get on the bolt head and rotate the engine. Too long and your wrench runs into the radiator or radiator fan shroud. You with receive a 3-inch deep socket and a 1 inch long wobble extension both in 1/2 drive. The wobble extension will allow you to bend the ratchet if needed. If you want to tighten up the wobble wrap some masking tape around the end as shown. 

Early V8 and Diesel Engine Rotation Socket and Extension
$12.80
SKU:
TUL-CRANKSOCKET

Product Details

It is all about having the right tools

To purchase our extendable 1/2 drive ratchet see related products below:

Picture below is showing socket works on late 1960 250SE 250SL  280SE 280SL engine

Related Products: