Kent has combined three of our popular M110 products into a single master kit. Each one can be purchased separately ( see below ), or you can purchase all here and save headaches and $$. You will receive detailed video instructions on how to install and use each one. If you plan to test or adjust your WUR, a fuel system pressure tester is required as shown in the related products listed below.
Product Details
The relocation kit moves the WUR from under the engine up next to the fuel distributor. It includes the metal plate and straps you will need to fabricate a mount off the intake manifold. Full instructions are included along with a bend pattern.
The cold start adjustment modification kit will require some drilling and taping. Full instructions are included
The included 12-volt plug-in test lead is part of our complete testing kit (see below). This will allow you to test the heating unit inside the WUR without having to start the engine.
RECOMMENDATION: While you have the WUR off the engine, you might wanna consider installing a rebuild kit. Who knows how long or how old those components are inside your existing warm-up regulator? Please refer to the related products below to order this separately.
Related Products:
1976 to 1985 K-Jetronic Warm-Up Regulator (WUR) Diagnostic Test Kit
PLEASE NOTE BEFORE ORDERING: This WUR function test kit is INCLUDED in both 1976 to 1985 6-cylinder and V8 full pressure test kits (see related products below). There is no need to order this separately.
K-Jet Warm-Up Regulator WUR Testing and Adjustment Procedures - On Demand Video
In this 28-minute video, Kent will share with you some of his secrets on testing and adjusting the warm-up regulator on a 1976 to 1985 Mercedes K-Jetronic fuel-injected engine. A fuel pressure testing and his special kit will be required to complete all tasks.
M110 K-Jetronic Warm-UP Regulator Relocation Kit
This is a builder's kit and will require fabrication on your part. That means strap bending, location testing, bracket drilling, and WUR mounting. The kit comes with Kent's video instructions on how to do this and on how to hook up the electrical connector, vacuum hose, and two fuel lines.
K-jetronic Warm Up Regulator Cold Start Modification Kit w/ Video Instructions
Before you make this modification, you should be very familiar with the function of the WUR and how its pressure adjustments affect the performance of the K-Jetronic fuel injection systems. The tools and supplies offered in this kit will allow you to modify your warm-up regulator at home and in y
K-jetronic Warm Up Regulator WUR Single Vacuum Rebuild Kit
IF YOU ORDER THIS IN ERROR, IT IS NOT RETURNABLE. Watch the video below to determine which WUR you have BEFORE ordering. This ONLY works on single vacuum units!!! You will find the quality of this kit is impressive, and it has things in it that other kits do not have.
M110 6-Cylinder Fuel Injection Pressure Tester with Instructions
Why do a fuel system flow and pressure test? Without one, you will not know if your fuel injection is working properly. This is even more pronounced on K-Jetronic engines that incorporate a warm-up regulator. And guess where that is located on the M110 engine?