ALERT: Miracle Paint is back in stock! CLICK HERE to order.
If you own a 1998 to 2006 Mercedes with a V6 (M112) or a V8 (M113) engine this is one job you will have to deal with at some point. Just pull the top cover off your engine and look.
When used for bleeding or flushing your brake system, a single person can do a rapid fluid flush! No mess and very efficient. Will work on all Mercedes from 1968 to 1995 - Also select 1960's models and most later chassis up to 2006 see list below: 25-minute video instructions are now included.
This custom reamer designed and built by Kent Bergsma in our shop is the only one like it in the World. This is truly another first. Now you will be able to ream out that old crusty carbon build-up in your old diesel engine. Thread size matches old series-style glow plugs. 18 x 1.5
Cleaning out the carbon is a MUST anytime you change glow plugs in these engines. If you don't do this your engine will not run as well a startup and it will shorten the life of the new plugs. This is a high quality custom made glow reamer. All steel body. Made by Kent Bergsma.
Fits chassis 116 123 126 124 and 201 Diesels with pencil glow plugs, from 1978 to 1989. This includes the OM617, OM601, OM602, and OM603 engines. They also work on 1977 to 1979 300D 300CD and 300TD with series glow plugs. This pack includes three individual fuses.
When replacing the pan or the gasket we recommend installing these new stainless hex bolts and washers. You can see the pans these will work on below.
Forget about this bolt rusting again on your sway bar. Included are 2 correct bolts and blue thread locker to secure them in place.
Have you ever had to drive to the local hardware store to find a small o-ring? How much did that cost you in time and fuel? These are all small metric sizes. In the picture below, you can see the included sizes.
We starting using some of these to plug brake lines while changing out calipers. Then we started using them on fuel and oil hoses. Now we are using them all over the place and keep finding new uses for them on a monthly basis. These are a MUST HAVE! Watch the video below to become a believer!
Brakes are one of the most often neglected maintenance items on older cars. This is not just related to Mercedes Benz. Most owners don’t realize that brakes need special attention and service not only when pads are changed but every 2 years.
Over half the W123's Kent looks at today have their original battery hold down clamps missing. Most just seem to rust away. Kent decided he had to come up with a solution by providing a replacement clamp and nut that would not rust!
This is a special pre-chamber collar nut removal socket ONLY that works on the diesel engines in the 1990 to 1991 350SD 350SDL (126 chassis), 1990 to 1993 300D 2.5 (124 chassis), and 1992 to 1995 300SD / S350 (140 chassis).
Nice set of pick tools with plastic handles. They have strong steel tips which allow for more prying and twisting with less tendency to bend the tips as you would with dental pick tools. Note: Quarter is not included! Shown for size reference only
This is Kents new favorite ratchet wrench for turning engines over during service and repair. There are a number of maintenance procedures that require you rotate the engine over by hand.
Replace those nuts that keep loosening up with nylock metric nuts that just won't come off. Inside the door panel on the window regulators. Around the engine compartment. Air filter housing nuts. etc. etc.
Works on 110, 115, 116, 123, 201, 126 and 124 diesel engines 200D 220D 240D 300D 300CD 300TD 300SD 190D 300SDL. We have found that over half of the deep sockets we test will not go over some of the longer injectors.
When using a pencil glow plug reamer, this modified 12 mm wrench will allow you to PUSH in on the reamer while turning - and let me tell you - this is needed when you have heavy carbon buildup in the prechambers.
This must-have kit does not only have hard-to-find metric sizing, but the o-rings are made out of nitrile which holds up better to heat and is more resistant to oil, grease, hydraulic fluid, silicone and even water.
These washers are installed right under the four nuts that hold the valve cover securely to the cylinder head. They help to prevent the over tightening of the valve cover as well as prevent the nut from loosening up. They also keep the nut from gouging the metal out of the valve cover.
.Please review picture. What you see is what you get. 3 different lengths.
These same clips are used on almost all Mercedes Benz Models from the late 1960s up into the 1990s. If you have lost or damaged one of your clips here is a chance to get replacements. Maybe good idea to have spares on hand. Sold in set of 2.
High Quality (made in USA) brass two way fuel rated valve with brass fittings for 3/8 inch fuel hose. Can be used to select between two fuel tanks or as a control valve for your loop or return fuel with running on SVO.
Applies to all Mercedes, PON FIN Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201, and 124 chassis. Here is a kit you will love to have around the shop.
New copper alloy special locking nut for intake/exhaust manifold studs. New nuts should be used when replacing your manifold gasket.
When changing a front door seal on one of the above chassis you most likely will ending up need new attachments clips (along front edge of door). The majority of the old clips will break when you try to remove them.
Fits 116, 123 and 126 chassis diesel 1977 to 1985 only. We have been sourcing these copper washers from Mercedes Benz and also including o-rings for a long time with our fuel filter kits, due to the fact that they do not come with the fuel filters.
Fits all 123 and 126 chassis and later R107 as noted above - both gasoline and diesel models. It may fit a few other models as well but you MUST measure your old hose before ordering. We also carry the 15mm hose for most of the older models. See related products below:
Fits the following 116, 123, and 126 chassis to 1985. This is a very important line on the 617 turbo diesel engines that often breaks or becomes plugged. When it does you will lose power. It will feel like you are dragging an anchor or give you the indication your turbo is not working.
Applies to all Mercedes: Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201 and 124 chassis. If you ever need to replace a fuel tank, fuel pump, fuel filter, or fuel hose and don't want the fuel running down your arm here is the tool and will save the day!