Get $20.00 off any order over $150.00 (exclude shipping) Enter coupon code JOY20 at checkout Gift certificates available CLICK HERE.
Do you want to make the rear end ride like a new R107 - Then you have to replace the key suspension rubber parts that attach the rear suspension to the car. This kit has the parts you need. No instructions.
Kits contains:
This is our complete kit for an at-home DIY repair. Loose and worn out guide rod ball joint bushings are the most common front suspension problem on the W126 sedans and coupes. Check the condition of yours if you have not recently done so.
In this long video manual Kent will walk you step-by-step through the process of removing the older square style leveling valve from your Mercedes, opening it up without losing the spring and balls, removing the old o-rings and cleaning the parts properly, installing the new o-rings, and putting
Every one of these pumps I have ever seen needs resealing. The seals and o-rings become just too hard over all those years of use. This is the most complete SLS (self-leveling suspension) pump overhaul kit on the market today.
Fits 450SL 450SLC 450SE/L 380SL 380SE/L 380SEC 500SEL 500SEC 420SEL 560SL 560SEL 560SEC 1973 to 1991 - ALSO FITS 126 Chassis 300SDL 350SDL.
If you own a 123 wagon or other Mercedes with self-leveling suspension, you will be faced someday with having to replace the main high-pressure hydraulic hose that goes from the engine-driven pump to a metal line fitting routed back to the rear suspension.
Dont neglect this service as many do! I recommend the hydraulic fluid and filter be changed every 30,000 miles. You would not believe how many SLS vehicles I have seen with dirty hydraulic fluid - I mean nasty! Sometimes I have even found engine oil in the system!
Complete reseal kit as shown. Wow!
Sorry NO instructions available.
Bushing kit that attaches the front suspension guide rod to the lower control arm. This is a wear point that is often neglected and if loose can cause clunking in the front end. This is a complete kit for both sides. 2 kits included.
Common wear point on high mileage 126 front suspension. This is the bushing that connects the inside end of lower control arm to the subframe on all 126 sedans and SEC couples from 1981 to 1991. This is for one side only. You will need to order 2 if you are replacing both sides.
PLEASE READ THE ALERT BELOW BEFORE ORDERING. If your 126 sedan or SEC coupe is making front end clunking noises when you brake or go over bumps at slow speed you most likely need to replace the bushings where the lower front suspension guide rod attaches to a body subframe casting.