All new 2006 to 2013 V6 and V8 engine repair kits! CLICK HERE to view AlL.
Don't be afraid to own one of these splendid airmatic models and don't be afraid to take on some of the repairs yourself. This system is no where near as complicated as the air suspension on my 300SEL 6.3 and way easier and cheaper to repair.
This becomes something you should inspect on cars with over 80,000 if they have been driven on rough roads, and over 100,000 on airmatic cars that have mostly freeway mileage.
This kit includes 6 end fittings that attach the lines to the struts and the valve block, 1 meter of 4mm high-pressure line, and 2 splice connectors if you have to replace a broken or cracked plastic high-pressure line. These are "push-on to lock" in place. Very easy to install.
Sold in sets of two, as shown. They are very high quality and much less prone to break than the ones from Asia. These are used on top of the struts and all the connections of the valve block. Used on the W220, W211, W212, ML with airmatic, and the W221.
I decided to make this tester due to the number of reports of people wasting money and time trying to find the leak in their airmatic suspension. in some cases shops would just throw parts at it and the customer had to take it in two or three times before getting it permanently fixed.
You will need to loosen the bottom of the rear shock, disconnect the control arm from the outer knuckle, loosen the inside arm bolts, and drop the end of the control arm down. Kent designed this tool to make it easy for the DIY mechanic to do this job without having to take it into the shop.
I call this the hidden and forgotten bushing. Why? Because you can not see it to inspect it, it hardly ever gets changed. When these bushings wear out you will feel "weird" movement in your rear end, especially going over rough ground.
Flushes Out Old Grease and Repacks Bearings with Less Mess. This Handy Packer works on bearings up to 3 1/2" O.D.
I know that many, including some coil-over sellers, recommend just leaving the original pump and hoses in place and plugging them where they attach to the four struts, but I can almost guarantee you will have problems in the future, either with a noisy failing pump, leaking hydraulics, or a possi
When you need the torque, this will deliver.
They started using 18 mm hardware after 1996. Most wrench kits use to not even have an 18mm combination wrench - let alone a long one ( measures 11 inches long).
In this 6-minute instructional video Kent will show you how fully bleed the air out of the power steering system on V6 and V8 engines from 1998 to 2012. This will get rid of that annoying squeal when you turn the wheel. This happens after doing a flush or replacing a power steering pump.
This magnetic inline filter can give additional life to the power steering fluid on the M112 and M113 engines ( V6 and V8 from 1998 to 2006). The filter has 3/8 inch nipples and can accept a 3/8 inch hose ( size normally found in the return hoses on M112 and M113 engines.
For 2000 to 2006 chassis only mentioned in the title. Power steering reservoir is NOT for
In this 24-minute instructional video, Kent will walk you through removing your old fluid and reservoir tank on top of the power steering pump, installing the new tank, and flushing the system with new fluid. This is a service you can indeed do yourself in your garage.
There seems to always be a better way to do it.
In this video, Kent explains the correct procedure for cleaning and lubricating your hubs and rear brake rotor BEFORE you install your wheels. He hardly ever sees this done when removing wheels on 15 plus-year-old Mercedes so he knows it is almost ALWAYS neglected.
This includes Kent's three videos on the early Airmatic suspension from 2000 to 2006 that you see in the related products below. For detailed information on each video just click on those links.
In this video, I will go over the procedure of removing and replacing the level control valve in your older Mercedes with Airmatic suspension. The work here will be performed on a 2000 W220 S500. Other models may have the valve located in a different position with slightly different mounting.
I do not need to say much about this tool. Well made and well thought out. Someone who obviously was frustrated at scratching the finish on his or her alloy wheels came up with this idea. Watch the video below to see why this is now my favorite go it 17 mm lug bolt socket.
Kent will show you how he found one very small leak in the front and a inconsistant leak in the rear of the airmatic suspension on a W220 S500. Neither of these leaks were showing up on any diagnostic scan so they were not the direct fault of major component failure.