Search | W123 | Suspension

Displaying 1 - 50 of 81
$478.00

W123 300TD Wagon SLS Hydraulic Suspension Leveling Valve - REBUILT

Last good one. Fits all 123 300TD 1979 to 1985 - Corrosion free with bracket - Free how-to-adjust video and pin centering tool for installation

EXCELLENT refurbished leveling valve as shown. This one is right up there with the best we have seen. Never been subject to road salt. It is super clean inside with hardly any scratches.  Kent has taken this apart in his shop, cleaned it, and inspected it. All new seals installed.

$150.00

240D 300D 14-inch Light Weight Aluminum Wheel - Used

Factory installed on the later W123 chassis 240Ds to reduce weight. And sometimes found as spare tires in the 300 models.

ONLY ONE AVAILABLE. Wheel only NO TIRE. These wheels were unique to the last couple of years of the US model 240D. They will of course, fit all 123 chassis as well as the older 114 and 115. They make for great spare tires as they are so light. These are rare and getting harder to find.

$192.50

123 Chassis New Front Bilstein Shock Set of (2) HEAVY DUTY

For agressive driving on hauling heavy loads - PDF INSTRUCTIONS

FITS THE FOLLOWING all 123 chassis from 1977-1985 which include the 230, 240D, 240TD, 280E, 280CE, 300D, 300CD and 300TD. The best way to upgrade the original ride and feel of your Mercedes is to replace your shocks with new HEAVY DUTY Bilsteins.

123 Tie Rod Kit
$73.50

123 Chassis Front Steering Tie Rod Replacement Kit w/ Instructions

For all 240D 280E 280CE 300D 300CD 300TD 1977 to 1985

Kit contains right and left tie rod assemblies as shown. We have found if you discover one or more loose tie rod ball joints, it is always better to replace both rod assemblies at the same time. Entire assemblies are about the same price as two individual ball joints.

$195.00

1981 to 1984 300TD Wagon SLS Hydraulic Tank, Brackets, and Hoses- USED

This is what you will need up-front if someone has removed your SLS and you want to convert back.

Look at the picture carefully. These are the exact parts you will receive. They WILL NOT fit the 1985 model with the trap oxidizer and air filter mounted off the engine. Watch the video below for a full description and more details. BUSTER

$325.00

1981 to 1984 300TD Wagon SLS Hydraulic Hard Lines Complete - USED

Totally rust-free in excellent, undamaged condition. CAN NOT be shipped. Must be picked up in Bellingham, WA.

PLEASE do not try to check out online. If you are interested in coming to pick these up email us   sales@mercedessource.com.  Watch the video below for a full description. BUSTER

$695.00

1981 to 1985 300TD Wagon SLS Rear Suspension Components - USED

Removed from a rust-free and working SLS 1981 turbo wagon.

Even though these were working when removed, I have no way of knowing how long they will work. The fittings, rubber mounts, and hoses will be fine. The accumulators are probably a recent replacement, but there is NO Warrantee on the struts, and I have priced these parts accordingly.

$220.00

1985 300TD Wagon SLS High and Low Pressure Hose Set

NOTE; This ONLY fits 85 models with the reservoir tank on the driver side of the engine compartment

Very hard to find in good condition. This came off an 85 wagon with a trap oxidizer, air filter mounted off the engine behind the right headlight, and fluid tank for the SLS mounted on the left side of the engine compartment. The hoses are longer than the standard 1981 to 1984 turbo wagons.

On Demand Video
$3.99

How to Easily Remove Tie Rods and Tapered Shaft Ball Joints - On Demand Video

Do it without special tools and without damaging the rubber boot. Important if you plan to reuse it.

In this short 3-minute video, Kent will show you a trick that few know about. You can get those tapered shaft ball joints ( like to find on tie rods and control rods) loose without damaging the rubber boot. It can be faster and less painful than using traditional methods. 

$14.75

W123 and W126 Front Sway Bar Inspection Kit

You have to remove the rubber bushings to do an adequate inspection for corrosion.

You must inspect the sway bar, especially if the car has been subjected to road salt. Kent will explain in more detail in the video below.

$8.75

W123 W126 Front Sway Bar End Stainless Replacement Bolts

COMING SOON! Correct thread and length with thread locker included ( MUST) be used during assembly.

Forget about this bolt rusting again on your sway bar. Included are 2 correct bolts and blue thread locker to secure them in place.

$148.60

W123 W126 Front Sway Bar Repair Kit

SPECIAL ORDER ITEM -- UP TO FOUR DAY DELAY BEFORE SHIPPING

For one side only. It saves 20 hours of labor not having to replace the sway bar. 

$158.00

W123 Sedan and Coupe and Wagon Rear Suspension Rubber Restoration Kit

For all 123 models from 1977 to 1985. Restore that factory rear-end "feel." Bundle here and save $25.

Do you want the rear end to ride like a new W123? Then you have to replace the key suspension rubber parts that attach the rear suspension to the car. This kit has the parts you need, but it does not include instructions.

$28.75

W114 W115 R107 W116 W123 W126 Rear End Trailing Arm Bushing Set

Fits all those chassis models from 1968 to 1991. 4 bushings required.

These are the forward trailing arm bushings that connect the arms to the rear subframe. When these bushing get old or start to crack and break apart, you may hear noises in the back and the rear end may want to steer the car on its own. 

$19.95

W123 All Models Front Inside Sway Bar Bushing Set

These are almost never replaced but they can deteriorate with age.

These require removal of the batter and possibly the brake booster to replace. They are split so you do not need to remove the sway bar.  Plan to replace if doing work under the battery box area. Battery acid is hard on the right side. 

$23.80

Hand Wheel Bearing Packing Tool

You will be amazed how fast and how efficient this tool works!

Flushes Out Old Grease and Repacks Bearings with Less Mess. This Handy Packer works on bearings up to 3 1/2" O.D.

$269.00

1977 to 1985 Mercedes W123 Front End Ride Restoration Kit

PLEASE NOTE: SHIPPING TIME DELAY UP TO ONE WEEK ON THIS KIT DUE TO MULTIPLE PARTS IN KIT

SAVE BIG! These critical front suspension parts will restore the factory road feel on your old 123. Watch the video as Kent will explain what they are, where they do, and what is involved in replacing them. 

$90.00

W116 and W123 Upper Control Arm Set

Both right and left side. Replace both - if one is bad the other is not too far behind!

New left AND right side upper control arms. They will fit ALL W116 chassis from 1973 to 1980 ( except 6.9 ), and ALL W123 chassis sedans, coupes and wagons from 1977 to 1985.

On Demand Video
$1.99

How to Remove the SLS Hydraulic Pump Center Section - On Demand Video

New procedure 5/8/23 with a revised tool. This is an addendum to the full pump reseal instructions.

This is a short addendum to the full instructions on resealing an SLS hydraulic pump. This will now be included with the reseal kit. Disregard the old method mentioned elsewhere

$142.00

W123 Loose Front End Steering Fix Kit

Center tie rod, 2 end tie rods, and Idler bushing installation kit

Unless your steering box is all worn out, these are the parts you need to replace to get your 1977 to 1985 W123 steering tight again.  Fits all model sedans, wagons, and coupes. Be sure to get a front-end alignment after installing these parts. Partial instructions included.

On Demand Video
$19.99

How to Install New Steering Tie Rod Ball Joint Ends - On Demand Video

Here are the instructions you need to do it right and you can do it yourself!

In this detailed 30-minute video Kent will walk you through the process of installing new tie rod ends on his 1959 Mercedes 220SE. The principles are the same on almost all models from the 1950s up to the 1990s. He will explain the differences in adjustment between the older and newer styles

$85.00

1958 to 1991 Full Tie Rod End Replacement Kit w/ Video Instructions

Fits most model passenger cars. Ponton, Fintail, Coupes, SLs, W108 109, R107, W116, W114, W115,W123 and W126. Does NOT fit the W201 or W124 chassis

Loose steering or wheels shaking at speed. This can often be worn out tie rod ball joints. The joints can be replaced as a DIY project. Watch the video below to see if this is something you want to take on yourself.

This kit includes:

$16.50

Set of 5 14 inch Alloy Wheel Lug Bolts - USED

NOT for wheels with hubcaps. Used on W111, W108, W109, W116, R107, W114, W115, W123 and early to 1985 W126

Fits all Mercedes models with the 14" Alloy bundt cake style wheels. The measurements are M12x1.5mm by 51mm overall length. This is a set of five USED wheel bolts that are not all rusty. Recommend you clean. (Dawn dishwashing soap) And paint them silver before installation.

On Demand Video
$9.99

Repair Leaking Chrome Alloy Wheels with Miracle Paint - On Demand Video

Use multiple coats of Miracle Paint to stabilize and fill the corrosion that causes the tires to leak.

In this video, Kent will show you how he fixed his leaking tires on his chrome alloy wheels by using Miracle Paint. This is a full 22-minute step-by-step instructional video. Watch the video "trailer" below to give you a better understanding of what is involved in this procedure.

On Demand Video
$3.99

How to Install a Rear Sway Bar Link - On Demand Video

#1 Source of rear end clunking noise - For R107 W114 W115 W116 W123 and W126

Kent will get right up behind the rear end hub plate and show you close up how to remove and replace a sway bar link. This is not a difficult job especially if you follow the sequence shown in this 7- minute video.

$11.50

W116, W123 and W126 Front Wheel Bearing Grease Cap x 2

Fits all 116 sedans from 1973 to 1980, all 123 sedans, coupes and wagons 1977 to 1985 and all W126 sedans and SEC coupes 1981 to 1991

A brand new set of two grease caps as shown by Febi. Time to get rid of those ugly beat up and dented grease caps. 

$34.50

Bilstein Shock Absorber Deluxe Rapid Install Tool Set by Kent Bergsma

Back in stock. You will not believe how easy and fast you can remove and install those pesky top shock nuts! Especially on the R107!

Socket is now black (impact grade). This is a tool that Kent first thought about making 20 years ago. While installing shock absorbers in his 380SL he had finally had enough - so it was back to the machine shop to come up with a new tool.

On Demand Video
$3.99

SLS Pump Center Section Removal - On Demand Video

Supplement to the written overhaul instructions

This video will cover the use of my custom plastic tool to safely remove the steel center section for the outside aluminum housing with rebuilding your older style SLS ( Self Leveling Suspension) hydraulic pump. No other instructions included here.

On Demand Video
$9.99

Cleaning and Lubricating Hubs Before Wheel Installation - On Demand Video

So often neglected, yet so important. Also includes information on cleaning and installing lug bolts.

In this video, Kent explains the correct procedure for cleaning and lubricating your hubs and rear brake rotor BEFORE you install your wheels. He hardly ever sees this done when removing wheels on 15 plus-year-old Mercedes so he knows it is almost ALWAYS neglected.

On Demand Video
$14.99

Early SLS Hydraulic Pump Overhaul / Reseal Tips - On Demand Video

Companion to my written instructions that come with our reseal kit. See related products below:

PLEASE NOTE: These are not complete instructions on how to open up an early style SLS pump and properly reseal it. Rather, these are some tips that will make the job go faster and easier. These are things Kent has learned rebuilding a number of these pumps himself.

$19.75

Best Lug Bolt Socket Ever for Alloy Wheels

Fits all 17mm lug bolts from the 1950's up through the 2000's - prevents scratching the finish on your silver rims.

I do not need to say much about this tool. Well made and well thought out. Someone who obviously was frustrated at scratching the finish on his or her alloy wheels came up with this idea. Watch the video below to see why this is now my favorite go it 17 mm lug bolt socket.

$18.25

Bilstein Shock Absorber Removal and Installation Tool

Finally a real tool to hold the top of the shocks while turning the nut or nuts !!

This U.S.A. made 17 mm 8 inch long combination wrench is custom modified here in our shop to help you easily install Bilstein front and rear shocks on most of the older model Mercedes Benz.

On Demand Video
$3.99

Diagnosing an Often Overlooked Front End Clunking Noise - On Demand Video

Don't neglect front end clunking sounds - they can lead to some dangerous suspension failures

In this video instruction, Kent will demonstrate how to check for one possible source of a mysterious front end clunking sound. Any clunking noise you hear when driving over rough ground or when braking should be investigated immediately.

$48.50

Early SLS Self Leveling Valve Cleaning and Resealing Kit

Comes with everything you need to do a first class job plus two on-demand videos to help you overhaul and adjust the valve yourself

This is the most thorough kit available anywhere in the world for opening up and resealing your early style (square ) SLS leveling valve. This was used on all W123 300TD wagons and a few other models during that same time period.

$38.95

SLS Leveling Adjustment - Special Tool Set for Adjusting Ride Height

Adjustment can be done with regular wrenches, but when you are doing it under the car with engine running your words will not be kind.

Why these special tools? Can't you just adjust that rod with a couple of combination open end wrenches. Maybe yes and no... have you tried it?  You can not get the rod off with a regular thickness 10 mm open end wrench.

On Demand Video
$14.99

Early SLS Self Leveling Valve Adjustment Procedures - On Demand Video

This can be a pain in the back side without the right tools, equipment and know how!

Kent will walk you through the steps to properly adjust the leveling according to factory specifications. He will also cover some of the problems you may run into and demonstrate how he used the new adjusting tools he designed.

On Demand Video
$24.99

Early SLS Rear Suspension Leveling Valve Overhaul Instructions - On Demand Video

If your valve is leaking or not raising the rear of your SLS Benz, you can fix it yourself and save Big $$$

In this long video manual Kent will walk you step-by-step through the process of removing the older square style leveling valve from your Mercedes, opening it up without losing the spring and balls, removing the old o-rings and cleaning the parts properly, installing the new o-rings, and putting

On Demand Video
$6.99

How to Determine if Your SLS Accumulators are Bad - On Demand Video

Using both road tests and bence tests Kent will explain how you can troubleshoot them yourself!

Trying to fix a rough or bouncy ride in your SLS Mercedes? Not sure what is causing the problem?  Maybe you have heard that it might be the accumulators.

On Demand Video
$12.99

Mercedes SLS Accumulator Replacement Instructions - On Demand Video

Step-by-step procedure for safely removing the old accumulator balls and installing new ones

In this video Kent will walk you through the procedure of removing the old accumulators and installing new ones in a W123 300TD wagon. It is a very straightforward job that only takes a couple hours. You will need to raise the car and safely support it on jack stands.

On Demand Video
$7.99

W123 300TD SLS Tank Cleaning and Low Pressure Hose Replacement - On Demand Video

Step-by-step instructions for doing this important job safely and without a big mess

This video will walk you through the procedure of removing the hyraulic reservoir tank and cleaning it and replacing the low pressure hose from the bottom of the tank to the SLS pump. This is the hose that most often leaks.

$69.50

1977 to 1985 Power Steering ATF Fluid Upgrade Kit w/ Video Instructions

To reduce pump and steering box wear - replace that old automatic transmission fluid with enhanced power steering fluid

NOTE: UPS GROUND SHIPPING ONLY.  This complete kit will help you flush the old ATF fluid out of your power steering system and replace it with new high-performance power steering fluid.

Pages