This is a set of four STAINLESS STEEL custom machined Torx head door striker bolts. They will eliminate many headaches related to door closing issues on the W126 and 560SL doors. These are extras you may need when you adjust or replace your striker(s), and they do not include instructions or special tools. We also offer the original hex head bolts if desired, as they are still available as of May 2024.
Product Details
If needed, please see related products below for instructional videos, special tools, and new strikers. These will require a T45 Torx socket to install.
This is what the bolts look like when installed.
Related Products:
1981 To 1991 W126 All Models Left Side Door Striker
This part wears out over time and can cause a number of problems. Door clunking going over rough ground, door not closing easily, door accidentally popping open while driving, or you find yourself slamming the door just to get it fully closed.
1981 To 1991 W126 All Models Right Side Door Striker
This part wears out over time and can cause a number of problems. Door clunking going over rough ground, door not closing easily, door accidentally popping open while driving, or you find yourself slamming the door just to get it fully closed.
W126 and 560SL Door Striker Set ONLY ( left and right sides)
Left and right door strikers as shown. No extras
1986 to 1989 560SL Complete Door Striker and Bolt Upgrade Kit w/ FREE Speed Tool
The T45 speed bit included can be used in your drill to speed install and adjust the striker.The door strikers seem to wear out faster on the R107s than on any other chassis due primarily to the heavy doors.
Kent's Emergency Door Striker Bolt Removal Tool Kit w/ Video Instructions
You will receive two specialty drill bits and a modified star socket, along with very detailed video instructions on how to use these tools to remove a damaged head hex bolt without damaging the door frame or the old striker.
W123 Torx Head Door Striker Bolts x 4
This is a set of four STAINLESS STEEL custom machined Torx head door striker bolts. They will eliminate many headaches related to door closing issues on the W123 doors on all models from 1977 to 1985.