W123 300TD Wagon SLS Hydraulic Suspension Leveling Valve - REBUILT

Store > W123 > Suspension Products > Used Parts
Last good one. Fits all 123 300TD 1979 to 1985 - Corrosion free with bracket - Free how-to-adjust video and pin centering tool for installation

EXCELLENT refurbished leveling valve as shown. This one is right up there with the best we have seen. Never been subject to road salt. It is super clean inside with hardly any scratches.  Kent has taken this apart in his shop, cleaned it, and inspected it. All new seals installed. You will receive his video on how to adjust it once installed on the car and a flag pin to complete the adjustment.  He also recommends having his special toolset to make sure you don't lose your mind while attempting to get the rod off and the locking nuts tight. See related products below.

W123 300TD Wagon SLS Hydraulic Suspension Leveling Valve - REBUILT
$478.00
SKU:
USED-SLSLEVELVALVE
Free Add-Ons Included:

Early SLS Self Leveling Valve Adjustment Procedures - On Demand Video

Product Details

PLEASE NOTE:  On some valves, the outside fittings vary. You can install the fittings from your current pump if need be.

When you receive the rebuilt leveling valve here are some tips and precautions.
 
Be very careful when handling so no dirt particles will enter the unit and be SUPER CAREFUL when installing the threaded end of each hardline so you do not cross-thread. Run the fitting in two or three full turns by hand before you ever put a wrench to them. You may need to take some of your fitting adapters off your old valve and install them on the new valve before mounting them in your car.
 
Follow the video instructions adjust after installation.  
 
 

Related Products:

$59.50

123 300TD Wagon SLS Leveling Valve Adjusting Rod

For 1979 to 1985 300TD Only

Brand new Genuine Part. Plastic ball sockets can deteriorate and threads can rust up. It is important you have a good operating rod and tight arm in order to properly adjust your rear end ride height. NO instructions included. See our manual on SLS troubleshooting for more information.

$38.95

SLS Leveling Adjustment - Special Tool Set for Adjusting Ride Height

Adjustment can be done with regular wrenches, but when you are doing it under the car with engine running your words will not be kind.

Why these special tools? Can't you just adjust that rod with a couple of combination open end wrenches. Maybe yes and no... have you tried it?  You can not get the rod off with a regular thickness 10 mm open end wrench.

All Models Self Leveling Suspension SLS Proper Hydraulic Fluid - 1 Liter
$16.50

All Models Self Leveling Suspension SLS Proper Hydraulic Fluid - 1 Liter

300TD Wagon, 6.9, 560SEL, 300TE, 190E 16V, other Euro Models with Hydropneumatic Suspension

If you have any Mercedes model with hydraulic self leveling suspension from the early 70's up to the early 1990's this is the correct fluid to use. High quality Meyle or Febi Bilstein product. Any other type of fluid can damage the seals and score your pump.

Self Leveling Suspension (SLS) High Pressure Hose Replacement Kit w/ Instructions
$149.00
Currently out of stock.

Self Leveling Suspension (SLS) High Pressure Hose Replacement Kit w/ Instructions

Specific for the W123 300TD Wagon. May work for hose replacement on other models. Please read details below.

If you own a 123 wagon or other Mercedes with self-leveling suspension, you will be faced someday with having to replace the main high-pressure hydraulic hose that goes from the engine-driven pump to a metal line fitting routed back to the rear suspension.

$94.50

SLS (Self Leveling Suspension) Fluid Service Kit with Instructions

For 300TD Wagon 190E 16V 500SEL and Other Models up to 1991 with FREE filter for the W123 wagon

Dont neglect this service as many do! I recommend the hydraulic fluid and filter be changed every 30,000 miles. You would not believe how many SLS vehicles I have seen with dirty hydraulic fluid - I mean nasty!  Sometimes I have even found engine oil in the system!