Watch the video below to understand what this kit can do. Ensure your injection pump is thoroughly cleaned and lubricated before starting the engine after long storage.
Product Details
You will get six special steel pipes with the correct fittings on one end, six rubber fuel hoses, each 12 inches long, and zip ties to secure the hoses to the pipes. You do not need to use hose clamps as you are not dealing with back pressure. NEVER USE GASOLINE to clean or test the pump in this manner. Kent prefers 80 percent carb cleaner and 20 percent automatic transmission fluid as a cleaning and testing agent.
Along with these lines, you will need a small remote tank and a low-pressure electric pump to feed cleaner/lubricant through your jump. (as shown in the video above)