This is the newest LED light bulb Kent has found and tested that you can install on the backside of your instrument cluster to increase your instrument lighting on your older Mercedes. These particular bulbs will be much brighter with a white light, and they don't get hot! All the chassis models mentioned above use 2 bulbs to illuminate the dash at night. These are direct replacements for the original incandescent bulbs and this new generation is NOT polarity sensitive. If you have a working dimmer switch, these bulbs are also fully dimmable. Watch the videos below as Kent demonstrates his testing procedures, explains polarity, and shows the advantages of this new generation LED bulb in a W210 instrument cluster.
Product Details
PLEASE NOTE: These bulbs DO NOT COME WITH INSTRUCTIONS on how to get them installed in your instrument cluster. If you need that information, you can purchase Kent's instrument cluster manual separately. Some models will require special dash hooks to pull the cluster out. You can do it by hand from the backside on the W123 and the 1985 and older W126 - BUT on the later W126, you may not be able to get the cluster out of the dash without these special tools. See related products below to order instructions and dash pull tools separately.
CAN’T DECIDE WHICH COLOR? See our combo pack in the related products below
The picture below shows the difference in size between the original bulb and our new LED. It is slightly longer but still fits with room to spare and runs quite a bit cooler than the original factory bulbs.
The picture below shows the difference between our warm white bulbs and the bright white offered here. The warm white is on the left and the bright white is on the right.