5th Generation LED AMBER Instrument Light Bulbs x 2

For W123, W126 and W201 chassis ONLY. LOW heat and non-polarity wiring.

Kent has found and tested this newest LED light bulb that you can install on the backside of your instrument cluster to increase your instrument lighting on your older Mercedes. These particular bulbs will be much brighter with a more AMBER cast light, and they don't get hot!   Color temp is 2700. All the chassis models mentioned above use two bulbs to illuminate the dash at night. These are direct replacements for the original incandescent bulbs , and this new generation is NOT polarity sensitive (you can plug them either way no problem).  These bulbs are also fully dimmable if you have a working dimmer switch. Watch the videos below as Kent demonstrates his testing procedures, explains polarity, and shows the advantages of this new-generation LED bulb.

5th Generation LED AMBER Instrument Light Bulbs x 2
$12.75
SKU:
LTS-5THORANGE

Product Details

WHICH COLOR IS BEST FOR YOU

Demonstration W201 Yes - W124 NO!

PLEASE NOTE: These bulbs DO NOT COME WITH INSTRUCTIONS on how to get them installed in your instrument cluster. If you need that information, you can purchase Kent's instrument cluster manual separately. Some models will require special dash hooks to pull the cluster out. You can do it by hand from the backside on the W123 and the 1985 and older W126 - BUT on the later W126 and the W201 chassis, you may not be able to get the cluster out of the dash without these special tools. See related products below to order instructions and dash pull tools separately. 

The pictures below show the color, intensity, and temperature after being on for 30 minutes.

This is what they look like installed in a W201 instrument cluster. NOTE: The actual color in your car may vary slightly due to total darkness and other environmental conditions.

Related Products: