\Genuine Mercedes new parts a shown, but does have some shelf wear. This has been sitting in a dark and dry garage for about 20 years. It was mounted on an engine out of the car but not run. But it was put together with the housing and then taken apart. The gaskets caused a little pitting on the mating surfaces but can be easily sealed with new gaskets and gasket sealing compound. Only one available. This is the exact part you will receive.
Product Details
Here are some close-ups for the minor pitting on the two housing surfaces. I will include aviation permatex sealant which will easily seal these when a new gasket is installed.
The other mating surfaces are in good condition. There was something in the gasket sealant used that caused the pitting above as the pump was mounted on an engine outside the car for a long time. Here is one of the original gaskets that I will include although best to replace it.
Related Products:
M100 6.9 N.O.S. Engine Water Pump - 100 201 18 10 E
Genuine Mercedes new part a shown, but does have some shelf wear. This has been sitting in a dark and dry garage for about 20 years. It was mounted on an engine out of the car but not run. But it was put together with the housing and then taken apart.
1976 to 1979 450 and 6.9 Fuel Injection Delivery Overhaul Kit w/ 2 Hole Accumulator
This is our most complete FID kit yet. Kent wanted to make sure you would have all the parts you need including hardware.