Search | W201 | Suspension

Displaying 1 - 30 of 30
$26.00

W201 W124 Front Shock Strut Top Nut Special Wrench

Also works on R129 convertibles

When replacing the front struts ( shock absorbers ) on a W201 W124 or some W129 chassis it is frustrating and time-consuming trying to remove and replace the big 22 mm top nut on the front struts ( shocks ).

On Demand Video
$9.99

W201 W124 W140 R129 REAR Shock Absorber Installation - On Demand Video

Full step-by-step instructions including tools needed and special tips

In this video Kent will demonstrate how to replace the REAR shocks in the chassis mentioned above. He will do this on the ground on his W124 coupe using a floor jack, jack stands, and hand tools.

On Demand Video
$12.99

W201 W124 W140 R129 FRONT Shock Absorber Installation - On Demand Video

Full step-by-step instructions including tools needed and special tips to make the job go easier

In this video Kent will demonstrate how to replace the FRONT shocks in the chassis mentioned above. He will do this on the ground using a floor jack, jack stands, and hand tools.

$66.50

1986 to 2003 Control Arm to Knuckle Bushing Installation Tool

Designed by Kent. Best way to replace that "hidden" bushing without have to remove the control arm from the car. Fits MOST BUT NOT ALL. See list below.

You will need to loosen the bottom of the rear shock, disconnect the control arm from the outer knuckle, loosen the inside arm bolts, and drop the end of the control arm down. Kent designed this tool to make it easy for the DIY mechanic to do this job without having to take it into the shop.

$23.80

Hand Wheel Bearing Packing Tool

You will be amazed how fast and how efficient this tool works!

Flushes Out Old Grease and Repacks Bearings with Less Mess. This Handy Packer works on bearings up to 3 1/2" O.D.

On Demand Video
$1.99

How to Remove the SLS Hydraulic Pump Center Section - On Demand Video

New procedure 5/8/23 with a revised tool. This is an addendum to the full pump reseal instructions.

This is a short addendum to the full instructions on resealing an SLS hydraulic pump. This will now be included with the reseal kit. Disregard the old method mentioned elsewhere

$8.45

Loctite Metal Flange Gasket Maker - Small Tube ( 6 ml )

Very best sealant for differential covers and other flat mating surfaces that do not use a gasket. Will not deteriorate like silicone RTV

Here is my all-time favorite gasket maker and sealant. You may already know how I feel about RTV silicone products (I think they should be outlawed!). We have had a number of our customers ask us where to get this so we decided to offer it on our website.

On Demand Video
$9.99

Repair Leaking Chrome Alloy Wheels with Miracle Paint - On Demand Video

Use multiple coats of Miracle Paint to stabilize and fill the corrosion that causes the tires to leak.

In this video, Kent will show you how he fixed his leaking tires on his chrome alloy wheels by using Miracle Paint. This is a full 22-minute step-by-step instructional video. Watch the video "trailer" below to give you a better understanding of what is involved in this procedure.

Sale
$3.35

W201 W124 R129 Front Strut Holding Tool

Quality U.S. made 3/8 inch drive 7mm ball socket hex wrench

This will hold the top of the strut and keep it from turning when removing and installing the 22mm nut.

$34.50

Bilstein Shock Absorber Deluxe Rapid Install Tool Set by Kent Bergsma

Back in stock. You will not believe how easy and fast you can remove and install those pesky top shock nuts! Especially on the R107!

Socket is now black (impact grade). This is a tool that Kent first thought about making 20 years ago. While installing shock absorbers in his 380SL he had finally had enough - so it was back to the machine shop to come up with a new tool.

On Demand Video
$3.99

SLS Pump Center Section Removal - On Demand Video

Supplement to the written overhaul instructions

This video will cover the use of my custom plastic tool to safely remove the steel center section for the outside aluminum housing with rebuilding your older style SLS ( Self Leveling Suspension) hydraulic pump. No other instructions included here.

On Demand Video
$9.99

Cleaning and Lubricating Hubs Before Wheel Installation - On Demand Video

So often neglected, yet so important. Also includes information on cleaning and installing lug bolts.

In this video, Kent explains the correct procedure for cleaning and lubricating your hubs and rear brake rotor BEFORE you install your wheels. He hardly ever sees this done when removing wheels on 15 plus-year-old Mercedes so he knows it is almost ALWAYS neglected.

On Demand Video
$14.99

Early SLS Hydraulic Pump Overhaul / Reseal Tips - On Demand Video

Companion to my written instructions that come with our reseal kit. See related products below:

PLEASE NOTE: These are not complete instructions on how to open up an early style SLS pump and properly reseal it. Rather, these are some tips that will make the job go faster and easier. These are things Kent has learned rebuilding a number of these pumps himself.

$16.75

Best Lug Bolt Socket Ever for Alloy Wheels

Fits all 17mm lug bolts from the 1950's up through the 2000's - prevents scratching the finish on your silver rims.

I do not need to say much about this tool. Well made and well thought out. Someone who obviously was frustrated at scratching the finish on his or her alloy wheels came up with this idea. Watch the video below to see why this is now my favorite go it 17 mm lug bolt socket.

$18.25

Bilstein Shock Absorber Removal and Installation Tool

Finally a real tool to hold the top of the shocks while turning the nut or nuts !!

This U.S.A. made 17 mm 8 inch long combination wrench is custom modified here in our shop to help you easily install Bilstein front and rear shocks on most of the older model Mercedes Benz.

On Demand Video
$3.99

Diagnosing an Often Overlooked Front End Clunking Noise - On Demand Video

Don't neglect front end clunking sounds - they can lead to some dangerous suspension failures

In this video instruction, Kent will demonstrate how to check for one possible source of a mysterious front end clunking sound. Any clunking noise you hear when driving over rough ground or when braking should be investigated immediately.

On Demand Video
$24.99

Early SLS Rear Suspension Leveling Valve Overhaul Instructions - On Demand Video

If your valve is leaking or not raising the rear of your SLS Benz, you can fix it yourself and save Big $$$

In this long video manual Kent will walk you step-by-step through the process of removing the older square style leveling valve from your Mercedes, opening it up without losing the spring and balls, removing the old o-rings and cleaning the parts properly, installing the new o-rings, and putting

$59.50

1986 to 1995 Synthetic Power Steering Fluid Flush Kit

Most models W126 W201 W124 R107 R129 W140

PLEASE NOTE: UPS GROUND SHIPPING ONLY.  Sorry, no postal, expedited or international shipping. This is a highly neglected maintenance item on older Mercedes Benz. If you want to prolong the life of your steering box and power steering pump here's how.

$74.95

116 123 126 201 Chassis Hydraulic Suspension SLS Pump Resealing Kit

For most models with self leveling suspension from 1977 to 1991 - 6.9, 300TD, 16V, 560SEL SEC

Every one of these pumps I have ever seen needs resealing. The seals and o-rings become just too hard over all those years of use. This is the most complete SLS (self-leveling suspension) pump overhaul kit on the market today.

Self Leveling Suspension (SLS) High Pressure Hose Replacement Kit w/ Instructions
$145.00

Self Leveling Suspension (SLS) High Pressure Hose Replacement Kit w/ Instructions

Specific for the W123 300TD Wagon. May work for hose replacement on other models. Please read details below.

If you own a 123 wagon or other Mercedes with self-leveling suspension, you will be faced someday with having to replace the main high-pressure hydraulic hose that goes from the engine-driven pump to a metal line fitting routed back to the rear suspension.

$94.50

SLS (Self Leveling Suspension) Fluid Service Kit with Instructions

For 300TD Wagon 190E 16V 500SEL and Other Models up to 1991 with FREE filter for the W123 wagon

Dont neglect this service as many do! I recommend the hydraulic fluid and filter be changed every 30,000 miles. You would not believe how many SLS vehicles I have seen with dirty hydraulic fluid - I mean nasty!  Sometimes I have even found engine oil in the system!

$208.50
Currently out of stock.

W123 Wagon, W201 16V, and W126 560SEC Rear Suspension Accumulator Spheres x (2)

Very limited stock. Most common failure item on self-leveling suspension (SLS). Get a spare par. May soon be NLA.

There are two gas filled accumulators of this style under the rear of the 1979 to 1991 123 300TD wagons, 201 190E 16v and 126 560SEL sedan and 560SEC coupes with self leveling rear suspension ( SLS ).

$14.60

123 126 201 124 SLS Hydraulic Suspension Tank Supply Hose Upgrade

Kit to replace feed hose from tank to pump on 300TD 300TE 190E 16V 560SEL and 560 SEC

SLS low pressure hose from bottom of reservoir tank to the engine driven pump. Includes 1 meter of heavy duty fuel hose that holds up better to the hydraulic fuel than the old style original braided hose.

All Models Self Leveling Suspension SLS Proper Hydraulic Fluid - 1 Liter
$16.50

All Models Self Leveling Suspension SLS Proper Hydraulic Fluid - 1 Liter

300TD Wagon, 6.9, 560SEL, 300TE, 190E 16V, other Euro Models with Hydropneumatic Suspension

If you have any Mercedes model with hydraulic self leveling suspension from the early 70's up to the early 1990's this is the correct fluid to use. High quality Meyle or Febi Bilstein product. Any other type of fluid can damage the seals and score your pump.